How to book a billboard in Bangladesh, step by step
From the road, booking a billboard looks simple. There is a board, there is a brand on it, so somebody must have made a phone call. And yes, there is a phone call. But between that call and your brand standing above Dhaka traffic there are a handful of small steps, and skipping one is the usual way a campaign goes wrong.
The short answer: the billboard booking process has seven steps. To book a billboard in Bangladesh, decide your goal and audience, shortlist sites, call an outdoor advertising agency to check availability, visit the site, confirm the booking and send approved artwork. The agency then prints and mounts a static board, or schedules your video on an LED screen. You finish by collecting proof that it ran. At AD Pro, approved print artwork is due at least 72 hours before it goes up.
How do I book a billboard? The process at a glance
You book a billboard in seven steps: goal, shortlist, call, site visit, confirmation, artwork and proof. The table shows what to prepare at each step and what you should get back.
| Step | What you prepare | What you get back |
|---|---|---|
| 1. Set the goal and audience | One sentence on what the campaign must do, plus the cities and dates | A brief you can read out on a call |
| 2. Shortlist sites | Three to five sites from the directory, with format, size and facing noted | A list to ask about |
| 3. Call the agency | Your shortlist and your dates | A plan with photos of every site |
| 4. Visit the site | An hour, at the time of day your audience passes | Confidence in the view, or a good reason to swap sites |
| 5. Confirm the booking | Final sites and start and end dates, in writing | A confirmed booking |
| 6. Send approved artwork | An MP4 for LED, or print artwork in the board's proportions at least 72 hours before it goes up | Printing and mounting, or a place in the screen's schedule |
| 7. Collect proof | Nothing. This one is on the agency | Photographs for static boards, a log summary for LED |
The commercial terms depend on the sites and dates you choose, so AD Pro shares a plan when you call.
Steps 1 and 2: set the goal, then shortlist sites
Start with the audience, not the board. Who do you want to reach, and where are they at eight in the morning? A bank looking for office workers and a snack brand looking for students need different roads. Gulshan is Dhaka's office and diplomatic district. Dhanmondi is homes, campuses and shopping. Mirpur is dense and residential.
Next, pick a format. There are three main ones:
- LED billboards: a digital screen that plays a loop of short spots. You book minutes of airtime a day on each screen, usually 60 and on some screens 30.
- Static billboards: one printed face on one site. At AD Pro, one booking holds one site for twelve months.
- Tri-vision boards: rotating slats that show three faces in turn on one frame.
Now open the billboard directory. It lists all 87 AD Pro sites with the format, size and facing of each one. Dhaka alone has 65, so the Dhaka billboard locations page is the place to narrow things down.
Here is my one piece of advice for the shortlist: write down the facing, not just the name. Gulshan Circle-1, Mid Island is a good example. It has two LED screens on the same island, both 20 × 10 ft. One faces Gulshan-2 and Mohakhali. The other screen faces Police Plaza. Same address, different stream of traffic.

Step 3: call the agency. How early should I book?
Book as soon as your campaign dates are fixed, even if the creative is not ready. A static site carries one brand at a time, and an LED screen has only so many minutes in its day. Whether your site is open for your dates is something only a call can answer.
The one hard deadline I can give you is for print: AD Pro asks for approved artwork at least 72 hours before a static or tri-vision board goes up. For LED, ask on the call when the MP4 is needed. Either way, that is the last deadline, not the first. Before it come your shortlist, the site visit and your own internal approvals. My rule is to work backwards from the launch date and assume approvals will take longer than anyone promises.
When you call an outdoor advertising agency in Bangladesh, have three things ready: the city, the dates and a rough idea of scale. AD Pro comes back with a plan and photos of every site. You can call or WhatsApp +880 1958-503753, or use the contact page.
Step 4: how do I check a billboard before booking?
Go and stand in front of it. Ask the agency for a site visit and look at the board the way your audience will. A photo is a good start, but only a start.
This is the checklist I would take along:
- Stand where the audience is. In a car, on a bus, on the footpath.
- Check the facing. Does the board face the traffic you want, or the traffic going the other way?
- Look for anything in the way. Trees, cables and other signs can all sit between your message and the road.
- Go at the right time. Most AD Pro LED screens are on air from 7 am to 7 pm. A few differ: the Police Plaza entry gate screens and Shimanto Square run from 9 am to 7 pm, and Kandirpar in Cumilla runs from 5 pm to 9 pm.
- Judge the reading distance. The SKS Tower, Flyover View screen is 50 × 30 ft and faces Mohakhali Flyover. The Police Plaza entry gate screens are 6.5 × 9.5 ft. Those two need very different designs.
- Note indoor or outdoor. The Bashundhara City and Shimanto Square LED screens are indoors, so plan the design for that setting.
If something bothers you on the visit, say so before you confirm. Swapping a site at this stage is a short conversation. Swapping it after printing is not.
Steps 5 and 6: confirm, then send the agency what it needs
You need to send the agency four things: your final list of sites, your campaign dates, the name of one person who can approve things, and the approved artwork. Confirm the booking in writing, with each site named by its facing, the format, the dates and, for LED, the minutes of airtime a day.
Billboard artwork requirements for LED screens
For LED, send one MP4. AD Pro adapts it to every screen size in your plan. Short spots of around 15 seconds work best. Most screens in the network take a landscape 1920 × 1080 file, but not all of them. Police Plaza, Front Side is a portrait screen at 10 × 13 ft and 1080 × 1920. SKS Tower, Flyover View runs at 3840 × 2160.
So if you book an LED billboard in Dhaka on a mix of landscape and portrait screens, tell your designer early. A wide layout does not always survive being turned on its side.
Billboard artwork requirements for static and tri-vision boards
For print, the artwork follows the shape of the board. The Banani Chairman Bari billboard is 50 × 25 ft, twice as wide as it is tall. The Mirpur-10 Circle billboard near the Metro station is 26 × 50 ft, almost the opposite. One layout cannot serve both. Ask for the exact file specification for your site before the designer starts.
A tri-vision board needs three pieces of artwork, one for each face. The board at Jibon Bima Tower, Stadium Gate 3 has three faces of 20 × 10 ft each.

One more thing about the 72 hours. Approved means approved by everyone who has a say: your brand team, your boss, legal if they are involved. "Nearly final" is not a file format.
Who prints and installs the billboard?
The agency does. For a static billboard, AD Pro handles the site survey, structure, printing, mounting and permissions, then keeps the face clean and intact through the year. Printing is done in-house, so a revised artwork is a conversation with one team. If the artwork needs changing mid-year, AD Pro reprints and remounts it.
An LED campaign skips the printer. Your MP4 is adapted to each screen and scheduled, and AD Pro monitors playback.

Step 7: get proof that your billboard ran
A booking is not finished until you have proof. For LED, AD Pro sends a log summary as proof of play. A static or tri-vision board is photographed for you once the artwork is mounted.
File the proof and share it with your team. It answers the question a colleague will ask sooner or later: did it really run?
Booking a billboard in Bangladesh: the short version
Decide who you want to reach. Shortlist sites by area, format and facing. Call the agency, then go and see the board with your own eyes. Confirm in writing, send approved artwork on time (at least 72 hours ahead for print), and collect your proof at the end. None of it is hard. It just has to happen in that order.
AD Pro Communications Ltd. has worked on outdoor advertising in Bangladesh since 2018, from its office in Niketon, Gulshan 1, with 54 LED locations across 10 cities.
Ready to start? Call or WhatsApp +880 1958-503753 to check availability for your dates, or browse the full directory of billboard locations and build your shortlist first.
Frequently asked questions
- How do I book a billboard?
- Decide your goal and audience, shortlist sites in the directory, then call the agency to check availability and ask for a site visit. Once you are happy with the site, confirm the booking in writing and send approved artwork. The agency handles printing and mounting or LED scheduling, and you collect proof at the end.
- How early should I book?
- Book as soon as your campaign dates are fixed, even if the creative is not ready. For print, AD Pro asks for approved artwork at least 72 hours before it goes up, but the shortlist, the site visit and your internal approvals all come before that deadline.
- What do I need to send the agency?
- Send your final list of sites, your campaign dates, one contact person who can approve things, and the approved artwork. For LED that is one MP4, which AD Pro adapts to each screen. For static and tri-vision boards it is print artwork in the proportions of the board.
- Who prints and installs the billboard?
- The agency does. For static billboards AD Pro handles the site survey, structure, printing, mounting and permissions, and reprints and remounts if the artwork changes mid-year. LED campaigns need no printing: the video is scheduled on the screen and AD Pro monitors playback.
- How do I check a billboard before booking?
- Ask for a site visit and stand where your audience will be. Check the facing, look for anything blocking the view, and judge whether the message can be read from that distance. For LED screens, visit during on-air hours, which are 7 am to 7 pm for most AD Pro screens.